Positive Pneumatic Caliper Brakes
The Coremo EL type positive pneumatic caliper brake is intended for industrial applications which require variation in the clamping forces in response to changes in the air pressure. The input air pressure must not exceed 6 [bar]. Use of this brake is recommended, in particular, in applications which require greater thermal capacity per unit of surface area. The brake can be installed in any position as it has a lever balancing and lining pad alignment system. The SG iron caliper is designed to withstand the mechanical and thermal stresses generated in compliance with satisfactory safety coefficients. The lining pads can be adjusted to ensure that the friction surfaces grip the brake disc at all points.
Quality controls ensure a reliable, safe product and trouble-free caliper operation. The brake is suitable for applications where continuous braking or service stops are required.
The ALLTORQ service is completed by reporting which includes calculations, FEM analyses and technical reports (all in English) supplied to the customer to complete the technical documentation of the machine on which the brakes are to be installed. This enables customers to make comments on the design variables and allows the Technical Department to adjust the design to provide the most suitable solution.